Impact Pump

Description

The Impact pump is an interesting submersible water pump you have not seen before. It aids surface water pumps to pull water from underground water sources e.g boreholes or deep tanks.

It is based on the water-hammer effect acting as a double-acting hydraulic ram pump that enables surface pumps to lift up to 25m with 85% efficiency.

Impact Pump Specifications at a Glance

• Depth: The Impact Pump can lift water from up to 60m

What are the advantages of the Impact Pump?

• The pump construction is AISI 304 Stainless steel throughout encased within a plastic filter.
• The pump does not have any electrical components or sliding seals providing a design life exceeding 10years with routine maintenance.
• Safe to run dry as it does not have any electrical components or electronics submerged in water
• Tolerant to sand and silt, salts, and other solutes.
• Long-life due to the absence of submerged high-wear components.

How it Works

1. Water is pumped down the well using the surface pump
2. Extra water is drawn in by the Impact Pump (up to 3,000 L/hour)
3. Your tank is filled with the extra water, a small amount of water recirculates into the surface pump

This pump comes with all its fittings that will assist you during installation.